Double Disc Diameter 203mm Low Noise Metallographic Polishing Machine with Speed 1400rpm
Brief Introduction:
In the process of Metallographic sample preparation, polishing is a main procedure. After polished on the machine, the sample surface is like a mirror. iqualitrol P-2 Metallographic sample polishing machine is a classic polishing equipment with steady running,small noise,convenient operation and maintenance.
iqualitrol P-2 meets the polishing requirement of all kinds of materials.This machine is suitable for factories and mines enterprises,colleges and universities,scientific research institution.
Technical Specifications:
| Model |
iqualitrol P-2 |
| Grinding/polishing disc diameter |
φ203mm |
| Rotate speed |
1400r/min (900r/min alternative) |
| Input voltage |
AC380V/50HZ/3Ph |
| Disc quantity |
2 |
| Motor |
360W |
| Dimension |
888mm x478mm x915mm |
| Net weight |
31kg |
Polishing discs are covered with soft cloth impregnated with abrasive diamond particles and an oily lubricant or water lubricant.
Particles of two different grades are used: a coarser polish - typically with diamond particles 6 microns in diameter which should remove the scratches produced from the finest grinding stage,
and a finer polish – typically with diamond particles 1 micron in diameter, to produce a smooth surface.
Before using a finer polishing wheel the specimen should be washed thoroughly with warm soapy water followed by alcohol to prevent contamination of the disc. The drying can be made quicker using a hot air drier.
Mechanical polishing will always leave a layer of disturbed material on the surface of the specimen. Electropolishing or chemical polishing can be used to remove this, leaving an undisturbed surface.
Product Tags:
|
|
Double Disc Diameter 203mm Grinding And Polishing Equipment Speed 1400rpm Images
|
